Leading link fork... hot off the welders bench

In staying with the through-tube design I decided to mix it up a little. Since I'm casting my own elastomers I don't mind integrating the stubs in my design. Smaller cheaper fasteners and less loose parts.

To give you an idea of size, fork is over 300mm or 1' wide and that is a 20mm bolt and 32mm through tubes. I've made another set of rocker arms for the axle mount. The first set did not finish as nice. I will use them on the race buggy leading link fork.

Next to weld on some bolt tabs for footpegs and stirrups.